UPS 205 FG
Fluid Grade Ceramic
​
Abrasion resistant ceramic fluid & high-performance fluid grade engineering resurfacing compound designed for use
in fluid flow environments. Offering an outstanding protection against impingement, entrancement and erosion/corrosion conditions.​
​
Using a complex blend of epoxy resins and a poly amino-amide curing system reinforced with carbide and ceramic particles to produce a coating with a high level of abrasion and erosion resistance combined with optimum physical and mechanical strength.
Features & Benefits
​
-
Designed for application by stiff brush or squeegee.
-
Provides outstanding resistance to impingement, entrainment and erosion/corrosion.
-
Designed primarily for resurfacing metal components used in fluid flow environments.
-
Excellent adhesion to correctly prepared metal surfaces
-
UPS product is an ideal replacement from; Belzona 1321 Ceramic S Metal, Devcon Brushable Ceramic 11762, Chesterton ARC 855, Loctite 7227/ 72228 & Enecon Meta Clad Ceramolloy CL
Service: Sea Water, the job of this pipe line is to supply sea water to condensers being used to cool down temperatures of Natural Gas Compressors for Gas Turbines. Service Temperature: Ambient Service Pressure: 04 to 05 Bar Problem: Pipe Spools & Elbows are being badly eroded/corroded from inside and got pin holes very often. Which facility has to face during operation. Solution: *All Spools & Elbows were Grit Blasted, *Major weak areas were got Hot worked. *Pitted area, welding seems and other
Service: Sea Water, the job of this pipe line is to supply sea water to condensers being used to cool down temperatures of Natural Gas Compressors for Gas Turbines. Service Temperature: Ambient Service Pressure: 04 to 05 Bar Problem: Pipe Spools & Elbows are being badly eroded/corroded from inside and got pin holes very often. Which facility has to face during operation. Solution: *All Spools & Elbows were Grit Blasted, *Major weak areas were got Hot worked. *Pitted area, welding seems and other
Chemical Resistance
​
The product resists attack by a wide variety of inorganic acids, alkalis', salts and organic media,
Related Case Studies
Applications for UPS 205 FG
Fluid Grade Ceramic
​
-
Suitable for coating of equipment such as impellers, pump casings, valves,
heat exchanger end plates, water boxes, separator housings, pipes, propellers,
kort nozzles and rudders.
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
A great example of a complete pump overhaul & re-coating using;
Heat Resistance
​
Suitable for long-term water immersion at temperatures up to 90'C (194'F)
​
Resistant to dry heat in excess of 120'C (248'F) dependant on load.