UPS 200 EG
Ceramic Repair Paste
Is a two component solvent free epoxy metal repair compound,
High performance multi-purpose ceramic repair compound, specifically developed for rebuilding metal components in fluid flow environments damaged by erosion and corrosion. The UPS 200 EG formulation uses a complex blend of polymer resins and
polyamino-amide curing system reinforced with carbide and ceramic particles, to produce a coating with a high level of
abrasion and erosion resistance, combined with optimum physical and mechanical strength, along with excellent resistance to
corrosive liquids and gases
Apart from good mechanical properties, UPS 200 EG has an excellent chemical ad corrosion resistant
(Test for Salt Fog passes for 5,000 hours) which ensures a fool proof repair in any working condition.
Features & Benefits
Can be applied to any corroded or damaged component in one easy application.
Ideal for rebuilding pump bodies, impellers, propellers, guide vanes, valves, tube sheets, water boxes, rudder, heat exchangers, etc.
To regain original dimensions required for mechanical properties.
It bonds effectively to many substrates including wood & concrete.
Designed for application by trowel or spatula at thicknesses up to 12mm.
Provides outstanding wear and abrasion resistance.
Excellent adhesion to correctly prepared metal surfaces.
UPS product is an ideal replacement from Belzona 1311 Ceramic R Metal, Devcon Wear Resistant Putty WR2/11411, Chesterton ARC 858, Loctite 7218 & Enecon Metal Clad Ceramalloy.
For use on a wide range of metallic surfaces subject to abrasion and impact, especially those within fluid flow environments.
The product is suitable for emergency repairs or part of planned maintenance to equipment such as worn or damaged pump shafts, cracked pump or valve casings, scored hydraulic rams, worn bearing housings, damaged flanges, leaking tank seams and cracked engine blocks, etc.
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
Suitable for long-term water immersion at temperatures up to 90'C (194'F) and intermittent contact with pressured steam up to 120'C (248'F)
Resistant to dry heat in excess of 120'C (248'F) dependant on load.
The product resists attack by a wide variety of inorganic acids, alkalis', salts and organic media,