High Temperature Ceramic, UPS 225 HT

UPS 225 HT

High Temperature Ceramic

UPS 225 HT High Temperature Ceramic is designed to upgrade the performance of conventional materials of construction and in particular, to protect equipment operating in contact with water and aqueous / hydrocarbon mixtures against erosion / corrosion at elevated temperatures.

The coating once fully cured is capable of withstanding temperatures up to 130°C (265°F) in continuous immersion in water, salt water and crude oil (these temperatures are dependent on operating environment – refer to Unique Polymer Systems LTD Technical Department for advice).

The material can be applied directly to abrasive blasted steel or to surface previously coated with

UPS 105 EG Metal Repair Paste or UPS 200 EG Ceramic Repair Paste.

Back to Ceramic Linings

Back to High Temperature & Immersion

Features & Benefits

Designed for application by stiff brush or squeegee.
Provides outstanding resistance to impingement, entrainment and erosion / corrosion.
Primary designed for resurfacing metal components used in fluid flow environments.
Excellent adhesion to correctly prepared metal surfaces.
Fully cured is capable of withstanding temperatures up to 130°C (265°F)
The material can be applied directly to abrasive blasted steel or to surface previously coated with UPS 105 EG Metal Repair Paste or UPS 200 EG Ceramic Repair Paste.
UPS product is an ideal replacement from Belzona 1391 Ceramic.