UPS 125 XFP

Fast Curing Metal Paste

UPS 125 XFP Fast Curing Metal Paste is a fast curing two component solvent free epoxy metal repair compound.

The product has been designed to use on a wide range of metallic surfaces and once cured is readily machinable.

 

Applications for UPS 125 XFP Fast Curing Metal Paste​
  • Suitable for emergency repairs or part of planned maintenance to equipment 

  • Damaged pump shafts

  • Cracked pump or valve casings

  • Damaged flanges

  • Leaking tank seams

  • Cracked engine blocks

  • Underwater hulls & underwater structures or surfaces

Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired

Chemical Resistance

The product resists attack by a wide variety of low concentration inorganic acids, alkalies, salts and organic media. 

Product Advisory
Features & Benefits
  • Wide range of metallic surfaces

  • Once cured readily machine-able  

  • Suitable for long-term winter immersion at temperatures up to 60'C (140'F)

  • Resistant to dry heat in excess of 130'C (266'F) dependent on load

  • Product resists attack by a wide range of low concentration inorganic acids, alkalies, salts and organic media

  • UPS product is an ideal replacement from Belzona 1161 / 5831 /1212

At 20'C (68'F) the applied materials should be allowed to harden for the times indicated below before being subjected to the conditions indicated. These times will be extended at lower temperatures and reduced at high temperatures.

Heat Resistance 

Suitable for long-term water immersion at temperatures up to 60'C (140'F)

Resistant to dry heat in excess of 130'C (266'F) dependant on load. 

Product Documents

  • Facebook
  • Twitter
  • LinkedIn
  • YouTube