UPS 120 XFF

Fast Curing Metal Fluid

UPS 120 XFF Fast Curing Metal Fluid is a fast curing two-component solvent free epoxy metal repair fluid.

The product has been designed for use on a wide range of metallic surfaces and once cured is readily machinable.

Applications for UPS 120 XFF Fast Curing Metal Fluid
  • Suitable for emergency repairs or part of planned maintenance to equipment such as damaged flanges, leaking tank seams, and pipework.

  • Ideally suited for the repair and resurfacing of transformers where weeping or leaking oil is contaminating the repair surface.

Chemical Resistance

The product resists attack by a wide variety of low concentration inorganic acids, alkalies, salts and organic media. 

Heat Resistance 

Suitable for long-term water immersion at temperatures up to 60'C (140'F)

Resistant to dry heat in excess of 130'C (266'F) dependant on load. 

Product Advisory

Product Documents

Features & Benefits
  • Touch dry in 25 minutes.

  • Highly machinable.

  • Recommended for transformer repairs, as adhesion to Transformer Oil contaminated surfaces is exceptional

  • UPS product is an ideal replacement from Belzona 5831.

Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired

At 20'C (68'F) the applied materials should be allowed to harden for the times indicated below before being subjected to the conditions indicated. These times will be extended at lower temperatures and reduced at high temperatures.

  • Facebook
  • Twitter
  • LinkedIn
  • YouTube