UPS 210 CR

Efficiency Fluid Ceramic

 

UPS 210 CR is a super low friction efficiency ceramic high-performance, solvent-free coating, designed for use as a resurfacing and lining systems to improve the efficiency in fluid flow environments. Based on a specifically selected blend of epoxy resins and non-toxic polyamino curing agents, reinforced with carbide and inert flow enhancing pigments which produce a system with optimum physical and mechanical strengths and excellent resistance to erosion and corrosion

 

Simple, Safe, and Easy to use its excellent low friction surface improves flow rates in pumps and pipelines which will

make it an ideal choice,for the protection of water boxes, tube sheets, pumps, impellers, valves and heat exchangers.

Features & Benefits
 
  • Combines good application characteristics with great erosion and corrosion resistance.

  • Designed for application by brush.

  • Provides a low friction surface improving flow rates in pumps etc

  • Designed for resurfacing and lining metal components

  • UPS product is an ideal replacement from Belzona 1341 Supermetal Glide, Devcon Brushable Ceramic 11762, Chesterton ARC S2/ 855 / 23, Loctite 7226 & Enecon Chem Clad SC 

Product Applications 

Suitable for the coating of equipment such as;

  • Pump cases/  impellers

  • Water boxes

  • Heat exchangers

  • Valves

  • Pipe/s, Propeller/s

  • Rudder

  • Jet tubes

  • Kort nozzles, etc.

Heat Resistance 

Suitable for long-term water immersion at temperatures up to 60'C (140'F)

Resistant to dry heat in excess of 120'C (248'F) dependant on load. 

Life Cycle Cost of an Industrial Pump 

32% - Energy cost throughout working life       20% - Cost of maintenance        14% - Actual cost of pump when purchased       9% - Installation

  9% - Downtime     9% - Operation costs        7% - Environment

Chemical Resistance

The product resists attack by a wide variety of inorganic acids, alkalis', salts and organic media, 

As we read and see from the graph above the actual cost of the pump, accounts for only 14% of the overall operating cost, through the life of the pump. Energy and maintenance, account for over 50%,

with downtime adding another 9%. Although in many cases it is not practical to change pumps and adjust operating efficiencies,​

   

 Unique Polymer Systems LTD has developed a low friction coating that is proven to ;

                 

        1. INCREASE the Flow Rate through the pump

        2. REDUCE the Energy consumption
        3. REDUCE the cost of Maintenance​

Case Studies
Please reload

Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired

Product Documents

Product Advisory